Heading heading

• This tag can be epoxied into any non-metal recess on your equipment—provided your phone can reach the area to read the tag

• The world's smallest NFC tag!
• This tag is low profile and has no hard edges
• Place in a recess or a low wear area
• These tags only read if placed on metal
• These tags need to be applied with an adhesive. Check out this blog for our adhesive recommendations
• Available in Lime for those who like to stand out, or Grey if you need a something a little more stealthy

• High-tack self-adhesive NFC sticker
• Use in well-protected, low-impact areas
• Avoid placing on edges, corners, or areas that can take knocks
• Do not place in a proud area
• Consider using the Carabiner/Hardware tag or Rope Tag for a more robust solution

‍

• If your sling allows, stiching a tag into the textile can be a good option
• Our Sew-in NFC Tag is a patented, world-first solution for easily tagging fabric-based products with NFC technology.
• Each tag measures 14 x 36 mm and is 0.80 mm thick.
• They are specifically designed to be a durable, long-term solution for managing your gear.
• The most robust way to attach the tag is by stitching it directly into the fabric.

‍

• High-tack adhesive
• Designed for use on fibre ropes
• Minimum rope diameter: 5.5mm
• Available in a 50-pack or a printable roll
• Will not work on metal
• When using on large-diameter lifting slings: first apply a black heat shrink layer, place the rope label on top of black heat shrink, add a layer of clear heat shrink on top

• Incredibly robust
• Attach with a swaged cable
• Attach alongside existing ID tags

• Can be used on any item with a maximum diameter of 5cm
• Typically useful for harness gear loops, tools or any equipment where mechanical movement is not inhibited by the use of a cable tie
• Use on round slings and other textiles needs to be carefully considered, so as not to constrict the yarns and impact their ability to hold a load
• Consider the JOAT if you need a robust tag option

• Intended for use on plastic surfaces, such as Petzl harness ID cards, or under traditional rope labels
  
• Self-adhesive sticker‍
• This tag is not suitable for use on metal surfaces

• Use on webbing up to 27mm wide
• These durable tags are versatile and easily visible
• Make sure the tag doesn't constrict the webbing

‍

• High-tack self-adhesive NFC sticker
• Apply adhesive-lined heat-shrink over the tag to ensure the tag stays in place

• Our Sew-in NFC Tag is a patented, world-first solution for easily tagging fabric-based products with NFC technology.
• Each tag measures 14 x 36 mm and is 0.80 mm thick.
• They are specifically designed to be a durable, long-term solution for managing your gear.
• The most robust way to attach the tag is by stitching it directly into the fabric.

• Use on webbing up to 27mm wide
• These durable tags are versatile and easily visible
• Make sure the tag doesn't constrict the webbing

• Stick this NFC tag inside your helmet, and scan it from the outside!
• 15mm diameter
• Self-adhesive sticker
• Manufacturer-approved adhesive
• Safe for plastics
• Does not work on metal surfaces

• Intended for use under traditional rope labels or on plastic surfaces, such as Petzl harness ID cards
  
• Self-adhesive sticker
• Pairs nicely with our cut lengths of adhesive-lined heat shrink
  
• This tag is not suitable for use on metal surfaces

• High-tack adhesive
• Designed for use on fibre ropes
• Minimum rope diameter: 5.5mm
• Available in a 50-pack or a printable roll
• Will not work on metal
• Pair with our adhesive-lined heat shrink for the most robust solution

• Designed for round bar carabiners
• Flexible material fits snugly on 11mm carabiners and stretches to slightly larger diameters, like a 12mm round bar carabiner
• Incredibly durable
• Also available in 9mm diameter

• High-tack self-adhesive NFC sticker
• Apply adhesive-lined heat-shrink over the tag to ensure the tag stays in place
• Apply the tag to the non-threaded side of the shackle; the pinhead will offer a little added protection, then slide the heat shrink over the top

• Pop this handy little tag inside the tail of your ropes and never worry about losing a rope label again
• While manufacturers and retailers need to use rope labels to comply with standards, unfortunately the labels aren’t forever. The Rope Tag gives you an option to replace traditional rope labels with an NFC tag that can go into the tail of your rope
• We’re also working with rope manufacturers to approve them to go inside the splice – watch this space

• Low profile and has no hard edges, making it flush with most "I-beam" or "H-frame" style carabiners
• These tags only read if placed on metal.